Until a few years ago, only professional operations could afford geared cable winches because of the small production runs and heavy duty design. All this has changed since the introduction of the new Pfanzelt S-line cable winch series. With the S-line cable winch, Pfanzelt now offers geared cable winches especially designed for semi-professional contractors and tree farmers with an attractive price/performance ratio. The design is the same as with the larger models, only the dimensions have been rescaled to match the size of the usually smaller tractors.
S150 geared cable winch
The economical entry level geared cable winch with tractive force of 5.0 t. With a 1,500 mm stacking shield and a low height, this 3-point linkage cable winch is ideal for the smaller tractor.
S160 geared cable winch
For larger tractors and for users who require more tractive power, the S160 model offers a new, powerful mid-range model in the S-line cable winch range.
S172 geared cable winch
The S172 geared cable winch is ideal for larger jobs in farm woodland. The cable winch comes as standard with a 1,800 mm stacking shield.
Get more information and request a non-binding offer.
The alignment of the cable drum in the pulling direction enables easy cable payout and ensures low cable wear, as the cable is not fed out and wound in via several rollers in different directions. According to KWF tests, Pfanzelt cable winches have the lowest power requirement of any winch for paying out the cable. Moreover, the cable winch is mounted in an optimum position on the tractor in relation to centre of gravity.
Pfanzelt S-line geared cable winches are equipped with an especially robust stacking shield made of high strength fine grained steel to create a torsion-resistant box. The resulting wedge form is able to reliably absorb even lateral pulling forces, giving many years of robust service. Laterally actuated parking supports ensure that the cable winch can be conveniently attached or removed the tractor, preventing accidents.
The cable winch is driven via the PTO shaft with speeds of 540, 750 or 1000 rpm. From the Cardan shaft, the drive is transmitted via a bevel gear to the precision worm gear immersed in an oil bath. This ensures very quiet running and permanent operating safety.
Multi-disc sintered plate sets are used for exact control of the braking and clutch operations and secure crossover. The complete system is protected by internal mounting.
The use of a cable drum with a large core diameter ensures very low tractive force loss from the top to bottom cable layer. According to independent tests by the KWF, the S-line cable winch has a maximum tractive force loss of 21% with a standard cable length. The very low cable infeed height enables simple and comfortable operation without deflection pulley.
With the Pfanzelt PPS precision controller, which is unique on the market, the cable winch can be adapted to the respective forwarding situation. The operator can rapidly and easily adjust the crossover of the clutch and brake by preselection. This offers maximum operating comfort and the highest degree of working safety.
The cable is always kept taut when drawn in, even if the trunk starts to slip or the cable is loose: all made possible by the Pfanzelt cable infeed brake. A cylinder presses the cable when it is drawn in with a brake roller against the brake block. The cylinder force is selected so that the cable can only be pressed against the brake block when it is in an unloaded state. When the cable is paid out, the brake opens completely.
The Pfanzelt cable payout has been developed to increase operating comfort and to improve the cable winding quality. The cable payout device
built into the pivoting arm of the cable distributor has a mechanical drive and is hydraulically actuated. The cable is thereby pressed against the cable roll via several flexibly mounted pressure rollers over a large radius. The large support surface ensures safe operability even if the cable is soiled or damaged.
Pfanzelt S-line geared cable winches can be equipped with a load lowering valve. This means that a cable under strain can be gradually released and lowered. This feature is essential for safety felling work In order to prevent disruptions, the cable winch operates with a separate oil circuit with filter unit that is fed via a radial piston pump and operates all hydraulic functions.
S-line cable winches come as standard with a wireless remote control for safe operation in a way that protects standing timber. The operator can thus stay outside the danger zone and clearly see any obstacles.
Functions: Pulling, loosening, short-circuit, infinitely variable motor speed adjustment, emergency stop
|Traction in lower cable layer||50 kN||60 kN||72 kN|
|Traction in upper cable layer||40 kN||47 kN||56 kN|
Standard cable lengths
|Ø 10 mm x 70 m||Ø 11 mm x 70 m|
Ø 12 mm x 60 m
|Professional forestry wireless control||Vetta remote control with rocker switch/emergency stop|
|Pfanzelt PPS precision controller|
|Stacking shield width (standard)||1,500 mm||1,500 mm||1,800 mm|
|Weight (without cable)||approx. 510 kg||approx. 540 kg||approx. 630 kg|
|Cable distribution with cable infeed brake||optional||optional|
Long cable package
Ø 10 mm x 110 m
Ø 11 mm x 100 m
|PTB automated drum trailing brake||optional||optional||optional|
|Load lowering valve||optional||optional|
|Bevel gear for front attachment||optional||optional|
|Shield width 1,800 mm||–||optional|
|Shield width 2,000 mm||–||optional|
|Shield width 2,200 mm||–||optional|