K Trac

New vehicle system with focus on the operator

The Pfanzelt K Trac with its 4 implement attachment points is a genuine year-round vehicle for the municipal depot and for use in landscape and environmental care. The arrangement of the individual attachment points and the drive system means that the vehicle cab can be located in the middle of the vehicle. The Pfanzelt XXL cab creates an operator position with an optimum view of the vehicle and attached equipment. Behind the cab, the K Trac concept offers plenty of space, which can be used for mowing booms, loading cranes or a flat bed. A large gritter can also be installed here.

Fast | continuously variable gearbox variaDRIVE (70 km/h)

Manoeuvrable | combined 4-wheel-steering

Powerful | 205, 253 or 292 hp/ 200 l hydraulic power

Agile | Combined 4-wheel steering

Flexible | 4 changeable attachment and mounting spaces

Comfortable | pneumatically suspended XXL comfort cab with rotatable driver’s platform or full-fledged passenger seat

Technical specs

Implement carrierK Trac 1220K Trac 1225K Trac 1230
Customise nowConfiguratorConfiguratorConfigurator
Engine151 kW | 205 hp | EU V | ISO 14396186 kW | 253 hp | EU V | ISO 14396215 kW | 292 hp | EU V | ISO 14396
Cylinder/ capacity/ nominal speed6 | 7,4 ltr. | 1,950 rpm
Type of motorAGCO Power 74 HD
Tank capacity350 ltr. Diesel | 40 ltr. AdBlue diesel exhaust fluid
TransmissionvariaDRIVE stepless (0 – 70 km/h) with reduced engine speed
Forward driving modes 3, reverse driving modes 2
(optionally 90 km/h)
Rear PTO540 rpm | 1,000 rpm
Front PTO1,000 rpm
Hydraulics 
Axial piston variable displacement pump160 ltr./min, 210 bar (optional 200 ltr./min, 210 bar)
Front/rear power liftsoptional
Control valves2 DW elektr. Heck
(optional: zusätzlich 2 DW elektr. prop. Front und Heck)
LS connexionRear power bracket (LS connexion)
Dimensions 
Empty weight8.200 - 9.200 kg*
Permitted total weight14.000 kg (optional 17.000 kg)
Permissible axle load6.000 kg front | 11.500 kg rear
Bearing load2,000 kg automatic trailer coupling | 3,000 kg ball head with sliding carriage
Dimensions4,990 mm long | 2,400 mm wide (standard) | 3,220 mm high*
Minimum width: 2,250mm | maximum width: 2,800 mm
Ground clearance540 mm*
Wheelbase3.325 mm
Weight distributionVA 55 %, HA 45 %
Turning circle14.6 m front-axle steering | 10.50 m all-wheel steering (with standard tyres)
Mounting spaceWidth up to approx. 1,010 mm inside, above the mudguard up to max. outside width,
Height up to approx. 2,820 mm depending on tyres,
Length approx. 2,000 mm, also more depending on overhang
Tyres400/80 R 28 – 440/80 R 30 Nokian TRI 2 (standard)

 

* Values depend on equipment

This could also interest you

Multipurpose tractor Pm Trac

The Pfanzelt Pm Trac Generation 36, thanks to its unique vehicle design. is optimised for combined service in agriculture and forestry as well as in landscape management.

read more

 

Configuratortop